Hazard Control Working at Height at PT Wijaya Karya Bangunan Gedung Tbk. Halim High-Speed Train Construction Project
DOI:
https://doi.org/10.58344/jmi.v3i7.1646Keywords:
Danger, Altitude, ControlAbstract
PT Wijaya karya Bangunan Gedung Tbk. Halim High-Speed Train Project is a company engaged in construction, investment, and concessions. Engaged in the construction sector certainly has a high potential for danger and danger factors. One of them was an accident caused by working at a height. Therefore, it is important to control the danger of working at height to prevent and control the danger of height. This study uses field observation methods, literature studies, and interviews to determine how the hazard control program works at height. The hazard control program for working at height at PT Wijaya Karya Bangunan Gedung Tbk, Halim High-Speed Train Project has been by the regulation of the Minister of Manpower No. 9 of 2016, among others. Fit to work, toolbox meeting inspection, Scaffolding and Full Body Harness. At PT Wijaya Karya Bangunan Gedung Tbk, The halim high-speed train project has procedures related to the Control of work hazards at height, namely the height work safety procedure No. WIKA-BG-PDSMM-IK-26. PT Wijaya Karya Bangunan Gedung Tbk. Halim High-Speed Train Project, but there are still problems related to the lack of supervision of work safety equipment and lack of training for workers related to high-altitude work.
References
Febriantia, L., & Sa, T. (2015). Application of Minimum Wages of Workers: based on the Government Regulation of the Republic of Indonesia No. 78 of 2015 about Wage.
Maulina, D., Irwanda, D. Y., Sekarmewangi, T. H., Putri, K. M. H., & Otgaar, H. (2021). How accurate are memories of traffic accidents? Increased false memory levels among motorcyclists when confronted with accident-related word lists. Transportation Research Part F: Traffic Psychology and Behaviour, 80, 275–294.
Oakley, D., Earthy, J., & Gibbins, A. (2020). ‘One hand for the ship’: the development of ergonomics guidance for access and egress.
Atabiq, Fauzun.et al. (2021). K3 Occupational Safety and Health. Bandung: CV Media Sains Indonesia
BPJS Employment (2022). Data on the number of work accident cases in Indonesia
Ministry of Manpower of the Republic of Indonesia. (2016). Regulation of the Minister of Manpower No. 09/MEN/2016 concerning occupational safety and health in work at height. Jakarta:
ISO 45001:2018. Occupational Health and Safety Management System
Nurhijrah, N. (2018). Prevention of the risk of accidents falling from heights at work
Construction Industry in Indonesia. PEN ENGINEERING: Scientific Journal of Engineering Sciences, 3(1),85. https://doi.org/10.51557/pt_jiit.v3i1.172
Safetysignindonesia.id (2022). Not PPE, It's the Most Effective Element in the Risk Control Hierarchy
Sholihah, Qomariyatus (2020). Safety and Health of Construction work. Malang: UB Press
Siahaan T, M. Saleh S, A. Rani H. Implementation of the Occupational Safety and Health Management System (SMK3) (Case Study on the Preservation and Widening of Takengon City Road – Sp. Uning – Uwaq). J Civil Engineering and Perenc Archives. 2020; 3(1):426–33.
Susilowati Herlina, (2019) Hazard Control System at Height in an Effort to Prevent Work Accidents in the Soho Fatmawati Building Construction Project Vol 9, No 2/Juni2019 TERAS ISSN 1693-380X
Trianto, W. M. (2020). Working at Height on Construction Work – Regulations and
Precautions. Swara Patra Scientific Magazine, 10(1), 39–50. https://doi.org/10.37525/sp/2020-1/247
Published
Issue
Section
License
Copyright (c) 2024 Yenny Frisca Madhona, Hanifah Handayani, Sri Dinda Khairunisa

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.