STRATEGY FOR PROCUREMENT OF IMPORTED SESAME SEED RAW MATERIALS AT PD
LINGGAR SARI
Aqil Syahid Jayyidan1, Deru R Indika2
Email:
[email protected]1,
[email protected]2
|
Abstract |
|
The resources of each country are
different. This results in countries carrying out international trade. Sesame
is a commodity that has potential in the culinary industry. Sesame is
categorized as quality if the cultivation of the plant is carried out on dry
land or in places with low rainfall. Most of our fellow producers in
Indonesia have poor quality standards, and some have even failed to harvest
due to a climate that does not support the production of sesame commodities.
PD Linggar
Sari is one of the Small and Medium Enterprises (UKM) that produces Sesame
Wedding Cakes and Disposable Seeds as complementary raw materials. Initially,
PD Linggar Sari every week used 500 kg of imported
Indian sesame seeds which were obtained through local importers. However, due
to supply uncertainty, Pd Linggar Sari switched to
local sesame seeds. However, this transition has had the impact of decreasing
revenue by approximately 15% to 20% per year due to a decrease in product
quality. This research aims to provide suggestions for appropriate strategies
for PD Linggar Sari to procure imported sesame
seeds. The method used is Process Hierarchy Analysis with the types of data
used, namely secondary and primary data. There are three alternatives for
procuring imported sesame seeds: local importers, global markets, and direct
imports. The results of the analysis of imported sesame seed procurement show
that direct import is an alternative strategy for procuring imported seeds at
PD Linggar Sari. Keywords: Sesame Seeds, Import
Procurement Strategy, Hierarchy Process Analysis |
����������� Source the power you have every
country is different. That matter causes countries to trade in scope
international. Suppose a country has limitations or no own source of power
specific for making something product. In that case, the country can trade
internationally with other countries to get source power. Because of
that, international trade becomes a solution for the perpetrator's industry to
supply material standards or source power for sustainable production. Sesame is
one of the potential commodities used in the culinary industry, as well as oil,
pharmaceutical, cosmetics, etc., as a material base (Prihatin
& Thamrin Sebayang, 2018).
In Indonesia, sesame is processed by the perpetrator's industry in various
ways, including cooking oil, enhancing its deliciousness, making cakes, using
soy sauce, etc. Sesame can grow optimally in areas with a hot and bulk
raiclimate of 500 - 1150 millimeters (mm) per year. Sesame can be categorized
as quality if the cultivation plant is in the right environment (Damaiyani
et al., 2020). Based on data from the
Meteorology, Climatology, and Geophysics Agency (BMKG), the average rainfall
recorded rain in Indonesia amounted to 2,898 millimeters (mm) per year in 2022 (Finaka,
2023). According to the
statement, Indonesia's climate could be better by wanting to produce
seed-quality sesame. Some producer sesame producers of rice harvest
(tifailedeharvestsin) due to poor climate support (Akmam, 2023). based on data
obtained by Hadi Sudarmo, a researcher at the Research Institute Plant
Sweeteners and Fiber, in 2020, Indonesia every the year do import sesame around
3000 tons of, produced only 1,475 tons with 3,200 ha of
(Perkebunan, 2020). Because of that, you can
conclude that most of the perpetrators' industries or individuals in Indonesia
trade internationally to get seed quality and guaranteed sesame to fulfill
their respective needs.
����������� Industry culinary is expected still
become a pillar of support sector manufacturing and the national economy
(Nirmala et al., 2022). That matters Because the
sector is one source of growth in the large economy of Indonesia and
contributes to the economy area (Zulfikri
& Iskandar, 2022).
����������� PD Linggar Sari is one of
Indonesia's Small and Medium Industries (IKM) in charge of the culinary
industry, to be exact, food light. PD Linggar Sari produces Marrie Sesame Cake
as much as not enough, more than 300,000 pcs per week. In producing these products,
PD Linggar Sari uses one material standard complement: seed sesame. Initially,
PD Linggar Sari used seed sesame obtained from Indian imports through an
importer (distributor) located in Bandung, as much as 500 kg each Sunday.
However, because of the importer's uncertainty, in 2020, the company Switched
to seed sesame locally available from two distributors, Cirebon (a small
distributor) and Bandung (a large distributor). Transition material standards
are done so the company can still produce to fulfill market demand. Uncertainty
supply is caused Because Distributor supplies are low and can fulfill high
market demand. High demand is caused by the uncertain needs of the
perpetrator's industries. When the request is high, and the inventory supply is
inadequate, the distributor raises the price of the seed sesame. That matter
causes fluctuation in the price of sesame imported.
����������� On the other hand, the price
principal PD Linggar Sari production became disturbed. Additionally, the impact
of the transition material standards when the company has a decline in income
is not enough, more than 15% to 20% per year
Study This was carried out at the PD Linggar Sari
company as subject research and assigned place for four months or more.
Research sites This is on Jalan Margaluyu Regency Ciamis, District Cikoneng,
West Java.
Types
of research ������
����������� Types of research This is a
descriptive-analytical study study with quantitative and qualitative
approaches. Quantitative data here means using data or information in detailed
shape numbers for results from this data can outline in a systematic way and make
a conclusion in a study. Meanwhile, qualitative data here means to understand
patterns of other people's thoughts and perspectives related to problems in
research.
Data
Type
����������� The first thing to do is collect the
required data to reach the goals that have been set. Data used in research
There are two types of data: secondary and primary data. Secondary data became
the most dominant data in the research. They were collected through scientific
journals, e-books, articles, websites, and other literature. In
addition, primary data was obtained directly in the field by giving
questionnaires to sources who had been determined. Three methods are used in
taking the questionnaires: interviewed stated face to face, telephone
interview, and independent. In the drafting process questionnaire, there are
four indicator form criteria or factors considered in the determination of one
from three alternatives that have been determined. Determination criteria are
based on problems experienced by PD Linggar Sari. Following are the criteria
considered in the election alternative procedure procurement seed sesame
import:
Table 1 Explanation criteria consideration in the determination of
alternative
|
No |
Criteria |
Description |
|
|
|
1 |
Availability Supply |
Determining the factor is alternative can answer
the availability supply in a way consistent and have other supplier backups
if One supplier No can fulfill the need of the company. |
|
|
|
2 |
Supplier Access |
Determining factor is alternative can provide convenience for the company to search,
interact, and connect Work The same with the candidate's supplier |
||
|
3 |
Cost |
Determining factor is alternative can give affordable cost in fulfillment need supply |
||
|
4 |
Practical |
Determining factor is alternative can provide convenience, speed, and efficiency in carrying out the
procurement process material standard import |
����������� Based on 4 criteria, one will choose
One from three alternatives for procurement of seed sesame import. Following is
an available alternative scheme in the implementation procurement of seed
sesame import:
Table 2 Explanation of alternatives procurement seed sesame import
|
No |
Alternative |
Description |
|
|
|
1 |
Local Importer |
Alternative procedure procurement material
standard import refers to the purchasing process of goods or product import through
an intermediary importer. |
|
|
|
2 |
Global Marketplace |
Alternative procedure procurement material
standard import refers to the procurement process of product, or goods import
utilizing global trading platforms. |
||
|
3 |
Import Direct |
Alternative procedure procurement material
standard import refers to the search process until purchasing goods are
imported directly from the supplier country without the involvement of
intermediaries, and online direct look after the entire import process. |
����������� In determining respondents, purposive
sampling becomes the technique used in taking the samples. Purposive
sampling is especially appropriate for samples with consideration-focused
skills and experience based on field studies. Furthermore
will do interviews and spread questionnaires to the five selected respondents,
including two lecturers studying program business international, the
procurement manager of PT Telemedika Optical, the export manager of the company
export commodity results in earth, and an energy expert field implementation
agreement trading international. Through the data obtained from the
respondent's expert, PD Linggar Sari decided what it would take. For
procurement, he imports material standards for his company.
Data
Processing Techniques
����������� Analytical Hierarchy Process (AHP) is a technique of
data processing used in a study of this. The analytical hierarchy process (AHP)
is a system-supporting decision for elaborating complex problems considering
many factors in some form of hierarchy. The purpose of AHP is to come priority
from various alternaalternativescomplex naturenatureslticriteria. This method
is used as one of the methods For finishing a problem
in a structured way. Data analysis using AHP was carried out after collecting
the relevant data for the study. Following the stages that will be done, use
the Analysis Hierarchy Process (AHP):
1.
Defining
problems and decisions desired solution
����������� things
first is determining problems that will resolved in a
clear and detailed way. After the problem has been determined, the next step is
to determine one or several suitable solutions to previously determined
problems.
2.
Hierarchical
Arrangement
����������� Next,
compile objective main as the highest level in something arrangement hierarchy.
Next, determine the hierarchical level at which it is located below it. That
is, the appropriate criteria for evaluating or considering a number of the
alternatives would be given. Every criterion has varying intensities. After
there are criteria, determine alternatives.
Figure 1Hierarchy for preparing the Analysis Hierarchy Process (AHP)
(Source:
Idtesis, 2018)
3.
Matrix
Comparison Pair
����������� The
matrix used is simple and has a strong position for framework consistency.
Additionally, the matrix is capable of evaluating sensitivity priority in a
comprehensive way for change consideration. Influence or contribution relative
to each component to objective or the same level of criteria depicted in matrix
comparison pair. Thus, matrix comparison will show how vital one element is to
the other. Comparison scale pairs and their meaning are as follows:
Table 3Rating scale comparison pair
Intensity
Interest |
Information |
|
1 |
The second element has the
same importance, two elements own the same influence: big |
|
3 |
One element is more
important than other elements |
|
5 |
One element is more
important than other elements |
|
7 |
One element is more
essential than the other |
|
9 |
One element is more
essential than the other |
|
2,4,6,8 |
Values between two values
adjacent considerations, value This is given if there are two compromises
between the two choices |
|
The
opposite |
If
for activity I get One number compared to activity j, then j has marked the
opposite compared with |
(source:
Supriadi et al., 2018)
����������� If in giving a mark or
determination, the respondent is more than one person, then must use geometric
mean:
Information
:
GM: Geometric Mean
X1 ������������� : 1st Expert
X2 ������������� : 2nd Expert
Xn: The nth expert
4.
Count
eigenvalues and determine the priority
����������� Next,
every criterion and alternative was compared in
accordance with his partner. At this stage, This
weight and priority will be calculated using solution equality. Additionally,
the eigenvalues will searched and used For test
consistency related to existing data counted. In steps, these things are done
are:
1)
Adding
up values from every column in the matrix To get the
total of each column's criteria
2)
Share
every mark from the column with the total of the column in question. To obtain
eigenvalues
3)
Adding
up the eigenvalues of every line
4)
Share
the amount eigenvalues of each row with the amount element to get priority
relative (amount priority relatively must be The same
with One)
5.
Measure
Consistency
The main goal of AHP is ratio
consistency with a review of the consistency index. Consistency is expected to
approach perfect for creating close to valid decisions. Things are done in step
This is:
1)
Multiplies
the total values in a column first with priority relative element first,
continue column second, and so on. Then add up every multiplication To get lambda maximum
2)
Calculating
the Consistency Index
3)
Calculating
Consistency ratio
6.
CI
Equation (Consistency Index)
CI =
Information :
CI
������������������ = Consistency Index
n
�������������������� = number element
λ max ������������� = Sum results for between result p
7.
CR
( Consistency Ratio ) equation
CR =
Information
:
CI �������������� = Consistency Index
IR �������������� = Random Index
CR ������������� = Consistency Ratio
Table 4Random index table
|
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
||
|
IR |
0.00 |
0.00 |
0.58 |
0.90 |
1.12 |
1.24 |
1.32 |
1.41 |
1.45 |
1.49 |
1.51 |
1.48 |
1.56 |
1.57 |
1.59 |
8.
Test
Consistency
����������� For inspection, consistency
hierarchy requires ratio consistency (CR). If ratio consistency is≥ 10%,
then considerations that have been made possible are wrong and require repair.
However, if the ratio consistency is ≤ 10%, then the results calculation
can be stated as Correct.
Analysis
Seed Raw Material Requirements Sesame PD Linggar Sari
����������� PD Linggar Sari is a small,
intermediate hereditary type of home industry family. The company started to
stand in 1984, located on Jalan Raya Cikoneng no 404 Rt 10 Rw 03 Cisaray
Hamlet, Margaluyu Village Subdistrict Cikoneng, Regency Ciamis and operates in
the field production food light, namely Marrie Sesame Cake. Raw materials used
in manufacturing products are refined sugar, seeds, sesame, and cake dry. Since
the start of the company, it has grown to be one of the main in the industry of
food light traditional in Indonesia. When the company starts standing,
operational company, this is done by yourself. As time goes by, the company
starts recruiting two employees and increasing the development of the company
when that marketing is carried out only in the area nearest just.
����������� As it develops, this company will
already have 40 employees with monthly power production of as many as 12,000
tickets or 1,200,000 pcs. In the production of sesame Marrie Cakes every month,
PD Linggar Sari uses several material standards, including seed sesame as many
as 2 tons, 4000 cartons of Marrie Cakes, and around 100 bags of sugar. Apart
from that, marketing is carried out by the company now. It has already
developed a penetration in the outside area, even now. This is outside the
province.
����������� With a strong commitment to quality
and innovative products, Linggar Sari has the trust of customers in various
cities and provinces. PD Linggar Sari knows that the product is delicious and
of high-quality standards. In production, the company now owns machine support
that makes things easier in the package and reproduces production of Marrie
Sesame Cake products. That matter reflects the success of the company in
fulfilling its needs. Increasingly, consumers will increase the food light
tradition. This company plans to increase the production and quality of
products for sustainable growth. Target market of product This is the sole and
current distributor. Linggar Sari already has a sole distributor.
Meanwhile, the
market segment targeted by the company is intermediate to lower because food is
food traditional. So, the company only thinks about production, not marketing,
because managing party marketing is the sole distributor. Because of that,
Linggar Sari has a primary focus as well as a period plan for sustainably
enhancing quality products with increased components of the production process.
Procurement
strategy analysis seed sesame imports to PD Linggar Sari
����������� The Analysis Hierarchy Process (AHP)
determines alternative procedures for procuring seed sesame import. The AHP
method was applied to the problems experienced by PD Linggar Sari so that the
problems could be solved in a structured way. As for the output or the results
obtained, the decision to determine an alternative procedure for procurement of
seed sesame import can be determined in a way maximum with full consideration
based on criteria consideration. Following is a retrieval process decision use
related to the Analysis Hierarchy Process (AHP) method alternative procedure
procurement seed sesame PD Linggar Sari imports:
1. Drafting
hierarchy
Figure 2Election
Hierarchy Procedure Import
2. Matrix
evaluation competition pair criteria
Table
5 Matrix
evaluation comparison criteria
3. Matrix
Evaluation Availability product � alternative
Table
6 Matrix
evaluation availability product - alternative
4. Matrix
evaluation access suppliers � alternatives
Table
7 Matrix
evaluation access supplier - alternative
5. Matrix
evaluation costs � alternatives.
Table
8 Matrix
evaluation cost - alternative
6. Matrix
evaluation practical � alternative
Table
9 Matrix
evaluation practical - alternative
7. Calculation
ranking alternative
Table
10 Matrix
calculation ranking alternative
����������� Based on 4 criteria, the best
alternative for PD Linggar Sari Dalam to procure seed sesame import is the
method of import directly with a results mark weight of 0.4623. Rating second
is importer local with a mark weight of 0.2690. Rating third is a global
marketplace with a mark weight of 0.2687. Import direct becomes the main
priority because alternatively, the own mark is the biggest among the 4 factors
considered. Thus, alternative imports have become the primary research proposal
for PD Linggar Sari.
Corporate
Strategy for Procurement Seed Sesame Import
����������� In importing PD, Linggar Sari needs
to directly enhance or create a business entity because one person finds the
company without existing minimum and adequate capital amount criteria for
micro, small, and medium enterprises (MSMEs). The company that I am proposing
is an Individual Company. An individual Company (Perorangan PT) is a legal
entity founded by only one person without minimum and adequate capital amount
criteria for Micro, Small, and Medium Enterprises (Babel Regional Office, 2022)
costs For creating an individual company, namely IDR
50,000.
����������� With an Already registered business
entity as an Individual Company, the company can register NIB (No Parent Try).
The NIB can used if the company wants to do import Because. That matter
happened Because according to Minister of Trade Regulation (Permendag) Number
75 of 2018, the current NIB applies as an Identification Number Import (API).
Number Parent Undertaking (NIB) is an identity perpetrator business published
by the Online Single Submission (OSS) institution. If the perpetrator business
Already has NIB, then the perpetrator business can submit permission for
business and permits commercial in accordance with their respective businesses.
Also, NIB can be used as a Company Registration Certificate (TDP),
Identification Number Import (API), and rights access customs. In the
manufacturing process, NIB does not cost anything.
����������� Import
direct becomes the alternative that would be proposed for PD Linggar Sari.
Import direct is an alternative procedure for procurement material standard
import, which refers to the search process until purchase goods are imported
directly from the supplier country without an intermediary, and online direct
looks after the entire import process. Following is an explanation of the
procedure general import process in Indonesia via the INSW portal according to
the Ministry of Trading in the Republic of Indonesia (Farida, 2013):
1.
Importers
look for goods suppliers who will import
2.
After
the agreement price, the importer opens an L/C at a foreign exchange bank with
an attached Sales Contract about things that will imported, then between
banks to overseas banks for contact suppliers and happens agreement by
the agreement. Fill in the agreed L/C second party
3.
Goods
from supplier ready for sent to harbor load (Port of Loading) for
submitted
4.
Supplier
sends the fax to importer document Bill
of Lading, Invoice, Packing List, and several other documents
if required (Certificate quarantine, Form E, Form D, etc.)
5.
The
original document was sent via Bank / second original to the importer
6.
Create/fill
out the document Submission Import of Goods (PIB). If the importer has a PIB
module and Electronic Data Interchange (EDI) system, it can input and
send PIB. However, I do have so, you can contact PPJK (Entrepreneur Customs
Services Management) for the input and delivery process of the PIB
7.
Import
duties, PPH, and other taxes will be incurred and paid, which is known through
the PIB that has been made. Apart from that, importers must also include
document completeness required in the PIB
8.
Importers
pay to a foreign exchange bank as big as taxes will be paid added cost Non-Tax
State Revenue (PNBP)
9.
Banks
do sending data to System Computer Online Customs and
Excise Services (SKP) via Electronic Data Exchange (PDE) media
10.
Importer
sends PIB data to SKP Customs and Excise directly online via PDE media
11.
PIB
data will first be processed on the Indonesia National Single Window (INSW)
portal to validate truth-charging PIB documents and verification
process-related licensing (Analyzing Point). Lartas (Prohibitions and
Restrictions)
12.
If
there are errors, then PIB will rejected, and the importer must do PIB
correction and send repeat return PIB data
13.
After
the process on the INSW portal is complete then, the PIB data will
automatically be sent to SKP Customs and Excise
14.
Return
PIB documents will be done validation truth charging PIB and Analyzing Point
documents in SKP
15.
If
the data is correct, make the routing
16.
If
PIB is affected, track green so we can directly issue a Letter of Approval for
Releasing Goods (SPPB)
17.
If
PIB is affected, track red so that the check process is carried out for goods
imported by Customs and Excise officers. If the result is Correct, it will exit
SPPB; if it is not, so will the penalty by applicable laws.
18.
After
the SPPB is issued, importers will get a response and do SPPB printing via the
PIB module.
19.
Items
can issued from the harbor, including document
original and SPPB.
Election Strategy Suppliers
����������� In selecting supplier
countries, researchers use information obtained via Trade Map. Trade Map is an
online database developed by the International Trade Center (ITC) regarding
international statistics, which provides indicators about performance export,
request international, alternative markets, and roles competitor Good from
corner look product and country (International Trade Center, nd-z). For this,
PD Linggar Sari got to do details related to export market share seed sesame
and supplier market seed sesame and can identify partner trade potential based
on product and place.
Table
11Top
5 exporting countries of seed sesame all over the world.
����������� Based on the statistical data
obtained through Trade Map, PD Linggar Sari recommended choosing a
supplier of seed sesame from Nigeria (the Exporter's 3rd largest for seed
sesame). That matters for several reasons: the quality of seed sesame seen from
growth value and amount in the 2018-2022 period, few non-tariff requirements
(8), and the sector average price for Nigerian seed sesame is affordable enough (International Trade Center, 2022).
����������� Based on information from Indonesia's
National Single Window (INS, Lartastas (Prohibitions and Restrictionexists
to import seed sesame. The following is Then it is necessary to import seed
sesame:
1.
Certification
Release Quarantine Plant Domestic Between Areas (KT.2)
2.
Certificate
of Disinfection / Disinfection (KT.9)
3.
Report
results inspection administrative (KT.13)
Determination Strategy Incoterms
����������� The selection of appropriate Incoterms depends on the
negotiation importer with the exporter or supplier, location suppliers,
transportation used, and rate control desired by the importer. Incoterms side
importers have some profitable choices, and they can become options for PD
Linggar Sari as an importer. The following are costs and risks in Incoterms
2020:
Figure 3Incoterms
transport obligation, cost, and risk
(Source: Idtesis, 2018)
����������� There
are two most common methods used by the perpetrators trading internationally,
namely CIF (Cost, Insurance, and freight) and FOB (Free on Board)
(Kristiani, 2022).
Based on the data above, the risks and costs that are the most profitable
for PD vinegar sari are Cost, Insurance, and Freight (CIF). CIF is one
of them. Incoterms are accepted in a way that is widespread and most
frequently used internationally, especially in trades that use track maritime.
Reasons why PD Linggar Sari is necessary for using CIF in the procurement of
seed sesame import that is relatively risky, security procurement import, and
utilization source Power transportation (GuidedImports, 2022).
Payment
Method Determination Strategy International
Figure 4Risk
payment diagram
����������������������������������������������������������� (Source: Noah, 2019)
����������� Trading
internationally owns the risk that causes uncertainty Good That for exporters
(sellers) as well as importers (buyers) in facet time payment and accuracy
goods Following is a proposal election method matching payment for PD Linggar
Sari with risks and benefits:
Table
12Payment
Methods International
(Source: Ministry of Trade of the Republic of
Indonesia, 2021)
����������� Rakyat Indonesia (BRI) is the
author's bank recommended as a party for assisting PD Linggar Sari in looking
after international transactions. That matters because of several reasons,
including PD Linggar Sari, already has a strong connection with Bank Rakyat
Indonesia (BRI) and Bank Rakyat Indonesia (BRI) as the owned bank government
the largest in Indonesia and will become the market leader in 2023 Indonesia.
That makes BRI own a vast network and guarantees credibility; BRI Bank has
service issuance of letters of credit (L/C) in the frame guarantee on base
request customers.
����������� As for the provisions in determining
the cost of shipping and insurance based on the National Single Window
Institute (LNSW), if you need more data to be available. Following is a
provision related to the cost of shipping and insurance (Lembaga et al.):
1.
For
transportation by sea, then the Freight: 5% of FOB (Free on Board) for goods
sent from ASEAN countries, 10% of FOB for Asia-Non ASEAN
or Australia, and 15% for countries other than both.
2.
Whereas
transportation is determined based on International Air Transport Association
(IATA) Tariffs.
3.
Insurance
is set at 0.5% of Cost and Freight (CFR) value.
����������� A
strategy has been formulated regarding the process of procuring imported sesame
seeds from Nigeria which will later be carried out by PD Linggar
Sari. The following is a calculation simulation via INSW for procuring imported
sesame seeds from Nigeria :
Is
known:
FOB:
$13,356 (12 tons)
Freight:
$2,003.4
Insurance:
$76,797
Import
duty: 5%
VAT:
11%
PPH:
2.50%
�
Answer:
CIF
= FOB + Freight + Insurance
=
$13,356 + $2,003.4 + $76,797
=
$15,436,197
Customs
Value = CIF x Dollar Exchange Rate
=
$15,436,197 x Rp. 15,879
=
Rp. 245,111,372,163
Import
Value = Customs Value + Import Duty
=
Rp. 245,111,372,163 + (5% x Rp. 245,111,372,163)
=
Rp. 257,366,940.77115
VAT
= VAT Rate x Import Value
=
11% x Rp. 257,366,940.77115
=
Rp. 28,310,363,4848265
PPH
Article 22 = Rate of PPh Article 22 x Import Value
=
2.50% x Rp. 257,366,940.77115
=
Rp. 6,434,173.51927875
Total
costs incurred
=
Customs Value + Import Duty + VAT + PPh
=
Rp. 245,111,372,163 + Rp. 12,255,568.60815 + Rp. 28,310,363.4848265 + Rp.
6,434,173.51927875
=
Rp. 292.111.477.7752553
=
Rp. 292,111,477 (12 tons)
Based on the results of data
processing and analysis carried out, there are conclusion the following:
1.
With
a capacity production company per month of as many as 1,200,000 pcs or 12,000
tickets, seed sesame seeds needed by PD Linggar Sari in a period of One month
is as much more than 2 tons.
2.
Based
on an assessment of 4 criteria (availability of product, access to suppliers,
costs, and practicality), alternative import directly becomes. The author
mainly proposes for PD Linggar Sari Dalam procurement of seed sesame import.
Apart from that, based on the data obtained from the International Trade
Center, the supplier country used PD Linggar Sari's goal is Nigeria because
of competitive quality, few non-tariff requirements (8), and affordable prices.
Related to Incoterms, CIF is the best option you can use with its
considerations, which are relatively risk small, guaranteed security
procurement, and utilization of a transportation company in the national scope.
The recommended payment method is open accounts and letters of credit
due to the method that can ensure the suitability of imported goods.
Damaiyani, Janis, Adikadarsih, Sri, & Prabowo, Heri.
(2020). POLLEN VIABILITY AND MORPHOLOGY OF SESAME (Sesamum et al.) AS A RESULT
OF GAMMA RAY IRRADIATION. Jurnal Penelitian Tanaman Industri, 26(2),
69. https://doi.org/10.21082/jlittri.v26n2.2020.69-77
Farida, T. (2013). Directorate General for National Export
Development. Kementrian Perdagangan Republik Indonesia, 2�5.
Finaka, A. (2023). Provinsi Paling sering dilanda hujan.
GuidedImports. (2022). CIF Incoterms: What CIF Means And
Pricing.
Idtesis. (2018). Pembahasan Lengkap Teori Analytical
Hierarchy Process (AHP) menurut Para Ahli dan Contoh Tesis Analytical Hierarchy
Process (AHP).
International Trade Centre. (2016). List of Exporters for the
Selected Product in 2015: All Products.
Juanda-J.S, D. dan Cahyono B. (2005).
Teknik budi daya dan analisis usaha tani.
Kementrian Perdagangan Republik
Indonesia. (2021). Metode Pembayaran Qris.
Kristiani, Vania M. (2022). Apa itu
CIF? Hal yang Wajib Anda Ketahui dalam Ekspor Impor!
Lembaga National Single Windows. (n.d.). Simulasi Perhitungan
Penerimaan Negara atas Ekspor atau Impor Barang.
Noah, D. (2019). Methods of Payment in International Trade:
An Introduction.
Nurmala, Nurmala, Sinari, Tri,
Lilianti, Ema, Jusmany, Jusmany, Emilda, Emilda, Arifin, Aryo, & Novalia,
Nurkadina. (2022). Usaha Kuliner Sebagai Penggerak Umkm Pada Masa Pandemi Covid
19. AKM: Aksi Kepada Masyarakat, 3(1), 65�74.
https://doi.org/10.36908/akm.v3i1.458
Perkebunan. (2020). Tanam Wijen Biar Tidak Impor.
Prihatin, Wiwit, & Thamrin Sebayang, Husni. (2018).
FREKUENSI DAN WAKTU PENYIANGAN GULMA YANG BERBEDA GROWTH AND YIELD OF SESAME (
Seamum indicum L .) ON DIFFERENT. Jurnal Produksi Tanaman, 6(7),
1597�1602.
Supriadi, Apip, Rustandi, Andi, Komarlina, Dwi Hastuti
Lestari, & Ardiani, Gusti Tia. (2018). Analytical Hierarchy Process (AHP)
Teknik Penentuan Strategi Daya Saing Kerajinan Bordir. In Advanced Decision
Making for HVAC Engineers.
Zulfikri, A., & Iskandar, Y. (2022). Strategi
Pengembangan UMKM Industri Kuliner Berbasis Masyarakat di Kawasan Wisata Pantai
Ujung Genteng Kabupaten Sukabumi.